At launch 3 Direct we make L4tnm PSA N Male Positive Stop Connector which is on our online store for the retail price of $17.00 plus tax, shipping, and handling fees. Some of the products features are:

• Type N Male Positive Stop
• No special tools required
• Full tightens in less than one rotation
• Integrated sealing mechanism
• Excellent electrical performance
• Item weigh - 6 ounces
• Products dimensions - 2 x 2.1 x 2.1 inches
• This product is part of the CommScope Wired for Wireless® Solution

 
Launch 3 makes it their main priority to satisfy each of their customers’ needs. With that being said, if one has further questions regarding the product, don’t hesitate to call the customer service department at 877-878-9134 between the hours of 9am and 5pm.

Launch 3 is the manufacturer of the Pre-Laced Hoisting Grip, which is currently online for the retail price of $13.25 plus tax, shipping, and handling fees. One pre-laced hoisting grip is included in the purchase. The hoisting grip provides an effective means for hoisting coax and elliptical waveguide into position. The pre-laced design permits the hoisting grip to enable easy positioning at 200 foot augmentations on long coax runs. The stainless steel hoisting grip features a closed-mesh design, which makes it easier to set up than the traditional split, lace-up grips. The hoisting grip kit includes a self-locking clamp which provides additional support during and after the installation. The 5/8” grips are made for supreme performance which reduces vibration and stress. As for the products dimensions, the item is measured at 6.00 in. wide x 0.50 in. high x 16.00 in. deep. The volume is 48.00 cubic in. with a weight of 0.21 lbs. If needed, the customer service department may be contacted for any further details or questions regarding the product. The department can be reached at 877-878-9134 from 9am to 5pm. Order a pre-laced hoisting grip today!

At launch 3 we manufacture Galvanized u bolt assemblies which are currently online for the retail price of $2.25 plus tax, shipping, and handling fees. Our U-bolt assemblies are assembled from hot dip galvanized steel and built to last. The hot dip galvanized U-bolt is used to attach pipes to a variety of structures. The hardware assembly includes flat washers, lock washers and hex nuts. The item is measured at 3.75 in. wide x 0.50 in. high x 5.25 in. deep.  The weight is 0.39 lbs. with a volume of 9.84 cubic in. According to our company, “We stand by our products and are committed to your satisfaction." There is also a warranty and hassle free return policy with the purchase of each item. For any further information needed regarding this product, the customer service department may be reached at 877-878-9134 between 9am and 5pm. Order you galvanized U-bolt assembly today!

Launch 3 is the makers of the Butyl Rubber Rolls, which are currently standing at the retail price of $1.75 plus tax, shipping, and handling fees. Butyl rubber is very resistant to most gases, sunlight, alkalis, acids, ozone, oxidation, elemental extremes and aging. Butyl rubber is normally used for weatherproofing and electrical insulation, but can also be used in many different applications. Once it’s applied, the butyl rubber tape is airtight and holds up against tearing and abrasions. The Products dimensions are measured at 1.50 in. wide x 1.50 in. high x 3.25 in. deep. The volume is 7.31 cubic in. with a weight of 0.18 lbs. At launch 3, we are committed to our customer’s satisfaction and stand by our products. With every item purchased, there is also a warranty and hassle free return policy included. The customer service department may be reached at 877-878-9134 if any further information is needed. Order your Butyl rubber rolls today!

Launch 3 is the manufacturer of the Vinyl Threaded Rod Protection Caps, of which the current online retail price stands at $5.00 plus tax, shipping, and handling fees. One hundred safety caps are included in each bag. The product comes in either black or red color. This product serves as an end cap to protect the ends of threaded rods. In terms of the product's dimensions, the item is measured at 5.00 in. wide x 1.00 in. high x 5.00 in. deep.Its volume is 25.00 cubic in. with a weight of 0.17 lbs. According to the seller, "We stand by our products and are committed to your satisfaction." As such, there is a warranty and a hassle free return policy included with the purchase of each item. The Customer Service Department may be contacted for any further additional questions or information required regarding this product. The department may be reached at 877-878-9134 from 9 am to 5 pm Eastern Standard Time. Order your protection caps today and protect the quality of your threaded rods entirely.